ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 40/GOLIATH - WHITE
| The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
| Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 40/GOLIATH/MANTA - BLACK
| The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
| Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 30 - WHITE
| The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
| Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 30 - BLACK
| The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
| Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...ReadyMadeRC
GOPRO-HOUSING "SNAP" V2.0 FOR GOPRO HD2 - WHITE
| Weight of the housing alone | 23 grams |
| Disclaimer | I suggest clipping off one side of the |
Most important changes:, - Screw-mechanism instead of the snapping mechanism (details see below), All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With version 1 there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the, A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
"Snap" is a GoPro-housing, which offers a perfect protection of ...ReadyMadeRC
GOPRO-HOUSING "SNAP" V2.0 FOR GOPRO HD2 - BLACK
| Weight of the housing alone | 23 grams |
| Disclaimer | I suggest clipping off one side of the |
Most important changes:, - Screw-mechanism instead of the snapping mechanism (details see below), All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With version 1 there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the, A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
"Snap" is a GoPro-housing, which offers a perfect protection of ...ReadyMadeRC
QUADRIXETTE 30 FRAME - BLACK (NO ARMS)
| Disclaimer | Arms are NOT included, please order them separately. |
The features in short:, , The set includes the following articles:, - 2 x Centerplates (GFK),
asynchronus setup for better flight direction detection when flying LOS ...ReadyMadeRC
GOPRO - DUAL CAMERA HOUSING GOPRO+CCD HERO1&2 - WHITE
"Snap-In"-Mechanism for a complete protection and a stable mounting:, We are especially proud of this, thats why the housing has been named after it: Due to a front-plate with a "snap"-mechanism, the box is completely sealed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using the 3 countersunk screws and the buttefly nuts included in the Quadrixette 30-frames, the housing can be mounted very flexible, :, "Snap" can be easily installed/uninstalled on the Quadrixette 30/40. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video).,
"Click" is a mounting system for cameras in the FPV-area. ...ReadyMadeRC
GOPRO-"SNAP" HOUSING FOR GOPRO HERO3 - BLACK
| Weight of the housing includingg screws and lens protection | 30 grams |
| Disclaimer | I suggest clipping off one side of the nut a bit, so there won't be any part of it that would |
All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With the first hero1&2-version there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the 2 lens-options. It does not need to be glued in, but instead is being hold perfectly tight by 3 polyamide screws., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue., A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
This GoPro-housing offers a perfect protection of your GoPro against ...ReadyMadeRC
GOPRO-"SNAP" HOUSING FOR GOPRO HERO3 - WHITE
| Weight of the housing includingg screws and lens protection | 30 grams |
| Disclaimer | I suggest clipping off one side of the nut a bit, so there won't be any part of it that would |
All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With the first hero1&2-version there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the 2 lens-options. It does not need to be glued in, but instead is being hold perfectly tight by 3 polyamide screws., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue., A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
This GoPro-housing offers a perfect protection of your GoPro against ...ReadyMadeRC
PICOSWITCH - RADIO CONTROLLED RELAY
| Max relay voltage | 60VDC, 125VAC |
| Max relay current | 1A @ 24VDC, 0.5A @ 125VAC (60W lightbulb) |
| Relay resistance | 100 mΩ max |
Weight:, 7.6g / 0.27oz, Specifications:, Note: PicoSwitch has a maximum voltage rating of 125VAC, meaking it unsuitable for toggling 220VAC applications., Diagrams:, , Dimensions:, 0.75" x 0.62" x 0.62", Applications:, Control of lighting systems on RC planes, boats, cars.,
Product Description PicoSwitch is a relay switch that you toggle ...ReadyMadeRC
400Q FRAME - FLAT G10 (HARDWARE INCLUDED) FROM REALFPV
,
ADS 400Q This frame is your go-to acro sport FPV ...ReadyMadeRC
CASTLE CREATIONS QUICK FIELD PROGRAMMER - AIR
,
Programs your controllers without a computer (mostly). Works as a ...ReadyMadeRC
REPLACEMENT BEARINGS - FOR 1306 (2PCS)
,
Replacement T-Motor bearings for the 4012 and 4014 motors.ReadyMadeRC
XUGONG-8 MULTICOPTER FRAME
Specs:, - This version designed for 8" props,
A unique foldable quadcopter, which, when folded, will fit comfortably ...